DPC300

The Godwin DPC300 automatic Dri-Prime Pump 12" (300 mm) centrifugal trash pump has gained recognition as the industry leader in high volume bypass pumping over the last fifteen years. With flows to 5,000 gallons per minute (315.5 l/sec.) and solids handling to 3-1/2" (89mm) in diameter, the DPC300 moves large volumes of water while providing the ease of automatic priming to 28' (8.5m). The convenience of a low profile discharge flange makes pipe connections easy and efficient. When the job calls for high volume, the Godwin DPC300 is the benchmark by which all others are judged.

Features

Direct drive automatic priming 12" (300 mm) high volume centrifugal pump with vacuum printing compressor mounted to a diesel engine. Also available in electric drive or as bare shaft pumped.
All cast iron construction with 4 vane cast iron impeller.
Extensive application flexibility - will handle raw sewage, slurries and liquids with solids up to 3-1/2" (89mm) in diameter.
Continuously operated Godwin air ejector priming device requiring no form of periodic adjustment or control.
Dry running, oil lubricated, mechanical seal with abrasion resistant solid silicon carbide interfaces.
Skid base incorporating integral overnight running fuel tank.
Solids handling swing check Non Return valve at pump discharge
Simple maintenance - normally limited to checking engine oil, compressor oil and seal lubrication.
Standard engine - John Deere 6068T. Also available with a variety of other engines including Cummins, Caterpillar, and Deutz.
Balanced unit with centralized lifting bracket for easy handling.
A variety of silenced units are available.
Low profile side discharge for easy pipe connection.

Performance & Specs

Performance

Diesel Set -

John Deere 6068T, 151 hp (113 kw) @ 2400 rpm, Skid Base

Impeller Diameter - 17" (430mm)

Specifications

Maximum Operating Speed:

Engine: 2450 rpm

Pump: 1200 rpm

Maximum Operating Temperature:

+212° (100°C)

Maximum Working Pressure:

52 psi (3.6 BAR)

Maximum Suction Pressure:

30 psi (2.1 BAR)

Maximum Casing Pressure

75 psi (5.2 BAR)

Fuel Tank Capacity:

105 and 150 gallon sizes available (397 and 548 liters)

Solids Handling:

3-1/2" (89mm) diameter

Pipe Connections

12" (300mm) ASA 150#