HL5MS

Features

• Fully automatic priming from dry to 28' of suction lift. Maximum heads to 455', max flows to 1000 gpm.
• Extensive application flexibility - will handle sludge with solids up to 1-3/8" in diameter.
• Pumpend available in cast iron, stainless steel and other hardened materials.
• Continuously operated "Godwin" venturi air ejector priming device featuring direct drive air compressor requiring no periodic adjustment or control.
• Dry running, oil-bath, mechanical seal with high abrasion resistant silicon carbide interfaces.
• Solids handling swing-type Non Return valve with renewable flexible rubber seat.
• Compact unit mounted on a heavy-duty skid base or two-wheeled highway trailer, both incorporating integral overnight running fuel tank and lifting frame.
• Simple maintenance - normally limited to checking engine and seal cavity oil levels.
• Standard engine - John Deere 6068T or Caterpillar 3056TA. Also available with other diesel engines or electric drive motor.
• Low-profile side discharge for easy pipe connection.

Performance & Specs

Performance

Diesel Set - John Deere 151hp @ 2400 rpm.

Caterpillar 3056TA, 160hp @2400 rpm

Impeller Diameter - 14-9/16"

Specifications

Maximum Operating Speed:

2400 rpm

Maximum Operating Temperature:

+212°

Maximum Working Pressure:

197 psi

Maximum Suction Pressure:

88 psi

Maximum Casing Pressure

296 psi

Fuel Tank Capacity:

105 to 175 gallons

Pipe Connections:

Suction: 6" ASA 150#

Discharge: 4" ASA 150#

Solids Handling:

1-3/8" diameter

Dimensions

Performance Curve