HL6M

The Godwin Dri-Prime 8" x 6" HL6M automatic priming centrifugal pump is a, high pressure discharge pump with flow capabilities to 2300 gpm and discharge heads to 320' or 135 psi. At home in a wide variety of applications, HL6M is used in temporary fire service, quarry and mine dewatering, and as a temporary replacement for permanently installed transfer pumps. Like all Godwin Dri-Pumps, the HL5MS can prime and reprime automatically from dry to 28' of suction lift.

More Information

Features

Fully automatic priming from dry to 28' of suction lift. Maximum heads to 320', max flows to 2300 gpm.
Extensive application flexibility - will handle sludge with solids up to 1-1/2" in diameter.
Pumpend available in cast iron, stainless steel and other hardened materials.
Continuously operated "Godwin" venturi air ejector priming device featuring direct drive air compressor requiring no periodic adjustment or control.
Dry running, oil-bath, mechanical seal with high abrasion resistant silicon carbide interfaces.
Solids handling flapper-type Non Return Valve with renewable flexible rubber seat.
Compact unit mounted on a heavy-duty skid base or two-wheeled highway trailer, both incorporating integral overnight running fuel tank and lifting frame.
Simple maintenance - normally limited to checking engine and seal cavity oil levels.
Standard engine - Caterpillar 3126. Available with a variety of engines including John Deere, Cummins, and Deutz. Also available with other diesel engines or electric drive motor.

Performance & Specs

Performance

Diesel Set - Caterpillar 3126 214hp

@2000 rpm.

Impeller Diameter - 15-3/4"

Specifications

Maximum Operating Speed:

2200 rpm

Maximum Operating Temperature:

+212°

Maximum Working Pressure:

140 psi

Maximum Suction Pressure:

88 psi

Maximum Casing Pressure

210 psi

Fuel Tank Capacity:

175 gallons, Skid

150 gallons, Trailer

Pipe Connections:

Suction: 8" ASA 150#

Discharge: 6" ASA 150#

Solids Handling:

1-1/2" diameter