Heidra 150MR
The Godwin 6" (150mm) Heidra 150MR hydraulic submersible pump offers improved performance and operating efficiencies that cannot be matched by standard electrical submersible models. With variable speed diesel engine power, the Heidra 150MR can meet a variety of flow and head requirements up to 1900 gpm (120 l/sec) and 160' (48.8m) of total dynamic head with a simple throttle adjustment. Add the ability to pass solids to 3" (75mm) in diameter, dry running capabilities, a cast chromium steel impeller, and you have a rugged dewatering/solids-handling, self-contained hydraulic submersible pump ready to go anywhere.
Features
- Rugged construction featuring cast iron pumping chamber and cast chromium steel impeller.
- The pump has independent bearings from the hydraulic gear motor, so pump loads do not affect gear motor performance.
- Double mechanical seal in its own clean oil bath allowing for indefinite dry running. Inboard seal: silicone carbide. Outboard seal: carbon or ceramic.
- Standard impeller designed for general pumping. slurries and sludges. Available vortex impeller provides greater solids-handling capabilities.
- Gear motor connections are standard two-bolt SAE flange.
- Simple to main ti an, gear motor with "plug-in" connection allows for quick changeover when required.
Specifications
Submersible Pump:
Hydraulic Motor: Gear Type
Drive Pressures: 3500 psi (241 BAR)
Flow: Up to 32 gal (121 l)
Pump Speed: Up to 2200 rpm
Impeller Diameter: 11" (279mm)
Solids Handling: 3" (75mm) max
Weight: 355 lbs. (161 kg)
Discharge Flange: 6" (500mm)
Hydraulic Connection:
1" (25mm) Quick Disconnect feed and return;
1/2" (13mm) Quick Disconnect case drain
Strainer: Nylon coated steel with 2.75" (70mm) square apertures
Power Pack:
Engine:JD4045D 72 hp (53kw)
@ 2400 rpm
Caterpillar 3054NA 74hp (55kw) @2200 rpm
Hydraulic System: Two pipe open circuit
Hydraulic Reservoir: 40 gallon (151l)
Hydraulic Pump: Gear Type
Control Valve: Through variable engine speed
Output Flow: 32 gal (151 l)
Output pressure: Up to 3500 psi
(241 BAR)
Suction Filter: 125 micron
Return Line Filter: 20 micron
Hydraulic Pipe Connections:
1" (25mm) wingnit Quick Disconnect fittings
DIMENSIONS
Performance Curve
