Heidra 200

The Heidra 200 hydraulic submersible pump is a self-contained, diesel powered 8" (200mm) pump available for heavy duty municipal and industrial dewatering and solids handling pumping applications. The Heidra 200 offers flow rates up to 3100 gpm (703.7 m3.hr) with up to 180' (54.9m) of total dynamic head and solids handling capability of 3-1/8" (79mm) in diameter. The unit consists of a sturdy cast iron submersible pumpend and hydraulic power pack mounted on a rugged steel skid. A variable displacement hydraulic piston pump on the power pack delivers hydraulic fluid to a fixed displacement piston motor that drives the pumpend's shaft bearings, and cast steel impeller. Simple engine throttle adjustments allow changes to pump flow and head performance.

More Information

Features

Rugged construction of cast iron pumped with cast chromium steel impeller.
Flow rates to 3100 gpm (703.7 m3/hr.) and heads to 180 feet.
Unique double mechanical seal immersed in isolated oil bath for unlimited dry running capability.
Integral 175 gal (662 l) fuel tank capacity provides over 24 hours of continuous operation.
Safety shutdown system incorporated into engine controls prevents equipment damage from engine fault or failure.
Impeller designed for general pumping with solids up to 3-1/8" in diameter.
"Quick-Disconnect" hydraulic fittings simplify setup, installation, and shutdown.
Standard John Deere 6068T or Caterpillar 3116TA engine. Also available with other diesel engines or electric drive motor.

Specifications

Submersible Pump:

Hydraulic Motor: Fixed Piston

Drive Pressures: 4000 psi (276 BAR)

Flow: Up to 57 gal (3.6 l/sec)

Pump Speed: Up to 2200 rpm

Impeller Diameter: 11-3/8" (290mm)

Solids Handling: 3-1/8" (79mm) dia

Discharge Flange: 8" (200mm)

Hydraulic Connection:

1-1/4" (32mm) Quick Disconnect

Strainer: Nylon coated steel with 2.75" (70mm) square apertures

Power Pack:

Engine:JD6068T 147 hp (110kw)

@ 2200 rpm

Caterpillar 3116TA 143hp (107kw) @2200 rpm

Hydraulic System: Two pipe open circuit

Hydraulic Reservoir: 80 gallon (303l)

Control Valve: Pressure compensated on/off valve

Output Flow: 32 gal (151 l)

Output pressure: Up to 4000 psi

(276 BAR)

Suction Filter: 125 micron

Return Line Filter: 20 micron

Hydraulic Pipe Connections:

1-1/4" (32mm) Quick Disconnect case drain

1/2" (13mm) Quick Disconnect case drain

Supply Line: 125 micron, pleated gauze

Dimensions