Heidra 300
The Heidra 300 hydraulic submersible pump is a self-contained,
hydraulic-powered 12" (300mm) submersible pump with a diesel-driven hydraulic power unit available for heavy duty municipal and industrial dewatering and solids handling pumping applications.
A variable displacement hydraulic piston pump on the power pack delivers hydraulic fluid to a fixed displacement piston motor that drives the pumpend's shaft, bearings, and cast steel impeller. Simple engine throttle adjustments allow changes to pump flow and head performance.
Features
- Cast iron pumpend with cast chromium steel impeller designed for general with solids handling up to 3.75" in diameter.
- Flow rates to 6000 gpm and heads to 200'.
- Unique double mechanical seal immersed in isolated oil bath for unlimited dry running capability.
- Integral 200 gal fuel tank capacity provides over 24 hours of continuous operation.
- Safety shutdown system incorporated into engine controls prevents equipment damage from engine fault or failure.
- Standard PrimeGuard Controller provides programmable operations including setting maintenance timers.
- Integrated stereo cage on pumpend protects pump while submersed, provides a lifting bale for easy transfer and provides an anchor spot for the hydraulic fittings.
- "Quick-Disconnect" hydraulic fittings simplify setup, installation, and shutdown.
- Standard John Deere 6068T. Also available with other diesel engines or electric drive motor.
Specifications
Submersible Pump:
Hydraulic Motor: Fixed Piston
Drive Pressures: 4500 psi
Flow: Up to 85 gpm
Pump Speed: Up to 1800 rpm
Impeller Diameter: 14.25"
Solids Handling: 3.75" diameter
Discharge Flange: 12" ASA 150
Hydraulic Connection:
4-1.25", 1-0.75" Quick Disconnect
Strainer: Nylon coated steel with 2.75" square apertures
Hydraulic Power Pack:
Engine: JD6068H water cooled diesel 275 hp @ 2000 rpm
Hydraulic System: Two pipe open circuit
Hydraulic Reservoir: 80 gallon
Control Valve: Pressure compensated on/off
Output Flow: 85 gpm
Output pressure: Up to 4500 psi
Return Line Filter: 20 micron
Hydraulic Pipe Connections:
1.25" Quick Disconnect feed (x2) and return (x2); .75" quick disconnect drain
1/2" Quick Disconnect case drain
Supply Line: 125 micron, pleated gauze
Dimensions
Performance Curve
